Products

Our Projects

Latest Works

Science Lab Building

New York, USA

Long Gate Bridge

Malmo, SE

Enix Lawyer Building

Toronto, CA

Deep Sea Bridge

Athens, GR

Car Tech Building

Denver, USA

Nctech Building

Texas, USA

Vax Tech Building

Ontario, CA

Food Lab Building

Athens, GR

Bio Flex

Bio flex to fix vitrified tiles and natural stones on the floor and wall, use a flexible mineral adhesive.

  1. Cement-based screeds, mortars, cement and gypsum-based, plasters/renders, cellular concrete, for, internal use.
  1. Ceramic tiles, vitrified tiles, terracotta, marble and natural stone, indian marble, various mosaics.
  1. Adhesive and finishing, flooring and walls, internal use and external use, terraces and balconies, swimming pools and fountains.
Bio Fix

Eco-friendly mineral adhesive with an extremely low chemical additive content for high performance bonding.

  1. Cement-based screeds and mortars, anhydrite screeds, cement-based and gypsum, renders/plaster, plasterboard, water and electric heated floors
  1. Ceramic tiles, porcelain tiles, terracotta, clinker, marble and natural stone, ceramic mosaics.
  1. adhesive and finishing, floors and walls, for internal use: external, domestic, commercial, street furniture.
Bio Tile

Adhesive for fixing ceramic tiles indoor and outdoor areas.

  1. Cement-based screeds, mortars, cement-based, plasters/renders
  1. ceramic tiles, terracotta, ceramic mosaic.
  1. Flooring and walls, for internal use external, domestic applications, commercial applications, street furniture.
H40 Gel

Preparation of the substrate: substrates must comply with BS 5385,parts 1–5, be level, cured, undamaged, compact, rigid, dry, and free from any deboning agents. It is good practice to dampen highly absorbent concrete substrates or apply a coat of primer or Eco. Anhydrite substrates must have a residual humidity of ≤ 0.5 CM.

To guarantee structural adhesion, it is necessary to apply a layer of adhesive sufficient to cover the entire back of the coating material. Large, rectangular sizes with sides > 60 cm and low-thickness sheets may require adhesive to be applied directly to the back of the material. Check samples to make sure the adhesive has been transferred to the back of the material.

  1. Materials and special substrates Marble–natural stones and recomposed materials: materials that are known to be subject to deformation or staining due to water absorption require a quick-setting or reactive adhesive.
Frugality® Eco

Patented and certified vitrified grout, eco-friendly with high-slide and easy-to-clean, anti-bacterial, water- and stain-proof joints between 0 and 20 mm, with a high level of chemical and mechanical resistance.

  1. Internal floors and walls
  2. Suitable for porcelain tiles, ceramics, large formats, low
  1. Water-resistant grouting of joints with high chemical and mechanical resistance and a high level of hardness
  2. Flooring and walls in indoor, domestic, commercial, and industrial applications and street furniture are subject to permanent or occasional
Max 1001 LWP +

MAX 1001 LWP+ is a specially formulated integral liquid waterproofing compound composed of surface-active plasticizing agents, polymers, and additives. It is used as an additive for cement, concrete, mortar, and plasters.

Basements, roof slabs and screeds, water tanks and water-retaining structures, external plastering, bathrooms and balconies, sumps and drains.

  1. Corrosion-resistant: makes concrete more cohesive, hence protecting steel better against corrosion.
  2. Compatibility: Being a liquid, easily dispersible, and compatible with concrete and mortar mixes
  3. Place the concrete or apply plaster, as needed.
Max 1005 Pave Seal

MAX 1005 PAVE SEAL (S/B) is a transparent acrylic UV TPR that provides resistance to weathering and foot traffic and offers UV and weathering properties. Typical applications include a clear acrylic UV TPR for Paver Block and Chequered Tile.

  1. Color enhancement of pavers and tiles
  2. Excellent adhesion to paver block or tile
  3. Resistance to weathering and UV
  4. Offers waterproofing properties
  5. Resistance to foot traffic
  1. Use rubber hand gloves and safety goggles while using MAX 1005 PAVE SEAL (S/B).
  2. In case of contact with skin, wash with plenty of water.
  3. Keep out of reach of children.
Max 2001 Block Fix

MAX 2001 BLOCK FIX is a highly polymer-enriched ready-mix mortar that needs clean water at the site to prepare paste mortar. It’s quite easy to use and specially designed for regular and hollow block masonry, brick masonry.

  1. form appearance grey powder, wet density 1.67 kg/lit, bulk density: 1640 kg/m3, grain size up to 3 mm, thickness after fixing the block 2 to 3 cm, compressive strength > 5.2 mpa.
  1. Add 12 liters of approximately clean water to the 100 kg of max 2001 block fix and mix with a low-speed mechanical mixer.
  2. Apply the max 2001 block fix paste mortar to the block surface with a trowel and press gently, taking care that contact is made properly with both surfaces with mortar.
Max 2003 Hard

MAX 2003 HARD (METALLIC AND NON-METALLIC) is composed of the best- quality ordinary Portland cement, properly selected, graded, washed, and dry aggregates, polymers, and additives. It is used as a concrete floor hardener for residential.

  1. Heavy Industry
  2. Desalination Plants
  3. Power Stations
  4. Agricultural buildings and yards
  1. Provides a high-strength wearing surface in areas subject to constant or frequently wet conditions without oxidizing.
  2. Reduces or prevents salt penetration into.
  3. It gives up to six times the abrasion resistance of plain, cured concrete.
  4. Iron aggregate is free of rust, oil, or other contaminants.
MAX 2004 Micro Concrete

MAX 2004 MICRO CONCRETE is a ready-to-use on-shrink, high-strength, free-flowing repair mortar that requires only the site addition of clean water. MAX 2004 MICRO CONCRETE is based on OPC, graded aggregates, binders, fillers, and additives that impart controlled expansion.

  1. Interior and exterior
  2. Structural repairs.
  3. Parking and bridge decks.
  4. Industrial floors, etc.
  5. Leveling and repair of horizontal concrete and masonry surfaces.
  1. Use rubber hand gloves and safety goggles while using MAX 2004 MICRO CONCRETE.
  2. In case of contact with skin, wash with plenty of water.
  3. Keep out of reach of children.
Max 2005 Max Create
  1. MAX 2005 MAX CREATE (GP2/HS) are specially.
  2. Formulated grouts for trouble-free foundations.
  3. Industrial machinery and other grouting needs.
  4. Designed from Portland cement, specially graded.
  1. The gaseous expansion system compensates.
    • shrinkage problems.
  2. No metallic particles, so non-rusting.
    • Metallic iron content to corrode and cause.
    • Staining or deterioration due to rust.
  3. High ultimate strength combined with dense
    • impermeable structure.
  1. Use rubber hand gloves and safety goggles while using MAX 2005 MAX CREATE (GP2/HS).
  2. In case of contact with skin, wash with plenty of water.
MAX 2010 Rust-o-con

Max 2010 RUST-O-CON is greenish, acidic, and clear. Ready-to-use rust converter. It converts the rust in protective coatings. Meets the requirements of IS 13515:1992, BS EN 12508:2000

  1. It converts rust into a protective coating and does not negatively affect rebar’s adhesion to concrete, Can be applied under varying weather conditions
  1. Use rubber hand gloves and safety goggles while using MAX 2010 RUST-O-CON.
  2. In case of contact with skin, wash with plenty of water.
  3. Keep out of reach of children.
Max 2011 Sem Pmm

MAX 2011 SEM PMM is a ready-to-use repair mortar composed of cement, properly elected graded fillers, re-dispersible co-polymers, additives with specially designed polypropylene fibre. It is available in powder to be mixed in a definite quantity of water for application.

  1. All kinds of repairs for structural members.
    • Industrial, commercial, and residential.
  2. Repairs of jetties and any other structure.
    • marine environment.
  1. Economics: saves primer costs and is easy to apply.
    • manually becomes economical.
  2. Low rebound: no rebound losses, hence no.
    • Wastage of material during the machine.
    • application.
Max 3001 SBR Latex

MAX 3001 SBR Latex is based on modified Styrene butadiene rubber latex, supplied as a ready-to-use bonding agent in liquid consistency.

    1. For concrete repairs, spalled concrete.
      • floors, columns, beams, chhajja, slabs, parapets
    2. For waterproofing: small roof terraces, sunken
      • portions of toilets and bathrooms, chhajja, and lift
      • pits, balconies
    1. Multipurpose: It is multipurpose and economical.
      • product, easy to use.
    2. Bonding: bond strongly to concrete, masonry.
      • stonework, plasters, and cementitious surfaces
    3. Erosion and corrosion: improving erosion
      • resistance and prevents corrosion
Max 3002 Super Latex

Max 3002 Super Latex is based on modified Styrene butadiene latex and acrylic latex are used for high-performance applications in waterproofing and repairs. It is used for repairs.

  1. As a bonding coat, plaster to plaster, concrete
  2. For cladding: fixing or refixing slip bricks
  3. As crack repair, plaster cracks larger than 5
  1. Excellent bond to most building materials.
  2. Reduces or prevents salt penetration into.
  3. Highly durable and economical system.
  4. Tough, hard-wearing, and breathable
    • waterproofing system for residential, industrial,
    • housing and commercial buildings.
Max 3003 Acrylic Latex

Max 3003 Acrylic Latex is composed of acrylic co-polymer emulsions and additives. It is used as a bonding agent for new and old substrates and cement mortar modifiers because it provides strong bonds to old and new concrete.

  1. Waterproofing of small terraces and masonry
    • surfaces, sunken slabs, residential water
    • tanks, chhajjas, etc.
  2. As a bonding aid for old and new
    • concrete/mortar.
  3. Water-resistant render or plaster
  1. Tough, hard-wearing, and breathable
    • waterproofing system for residential,
    • industrial, housing, and commercial.
  2. Can be applied in uniform thickness
    • Chorizontal and vertical surfaces.
  3. Excellent bond to most building materials.
Max 3004 Water Seal

Max 3004 Water Seal (S/B) is composed of siloxane and siline polymers dispersed in a high-boiling-point solvent. It is used for waterproofing concrete and cementitious vertical walls of buildings.

  1. Cement-painted surfaces
  2. Exposed Concrete Work
  3. Exposed Grit Wash Plaster
  4. Exposed Stone Work
  1. Allows the surface to breathe.
  2. Prevents moss growth.
  3. Retains the substrate’s original appearance.
  4. Increase the life expectancy of the building.
Max 3006 SBR-Z

Based on modified styrene butadiene rubber latex, supplied as a ready-to-use bonding agent in liquid consistency. It is used for the repair of spalled concrete—floors, columns, beams, chhajja’s, slabs—and also for the waterproofing of toilets and bathrooms.

  1. For concrete repairs, spalled concrete
    • Floors, columns, beams, chhajja, slabs, parapets
  2. For waterproofing: small roof terraces, sunken
    • portions of toilets and bathrooms, chhajja, and lift
    • pits, balconies
  3. For cladding: fixing or re-fixing of slip bricks
    • Tiles, stones, and marble bedding
  1. Multipurpose: It is multipurpose and economical.
    • Product, easy to use
  2. Cracking: It prevents cracking by improving
    • Flexural strength.
  3. Bonding: bond strongly to concrete, masonry.
    • Stonework, plasters, and cementitious surfaces.
MAX 3010 Terra Seal

MAX 3010 TERRA SEAL is an elastic, transparent acrylic UV TPR that provides resistance to weathering and foot traffic and offers UV properties. Typical applications include a clear acrylic UV TPR for china mosaic tiles and glass mosaic tiles.

  1. For waterproofing of China mosaic and glass
  2. mosaic
  1. Excellent adhesion to glazed ceramic surfaces
    • China mosaic.
  2. Good abrasion resistance and resistance
    • weathering and UV.
  3. Provides a glossy finish to the china mosaic.
Max 3014 White Seal

Max 3014 White Seal is a highly modified elastomeric breathable anti-carbonation coating supplied as a ready-to-use waterproofing agent in liquid consistency. It is composed of high-quality polymers, properly selected and graded fillers, additives, and polyacrylic bonding.

  1. Color: White
  2. Type: Highly modified elastomeric rubber
  3. pH: Value 7-9
  4. Sp. Gravity: 1.30
  5. Elongation: 300%
  1. Use rubber hand gloves and safety goggles while using MAX 3014 White Seal. In case of contact with skin, wash with plenty of water. Keep out of reach of children.
Max 3015 Black Seal

Max 3015 Black Seal is a highly modified elastomeric rubber coating supplied as a ready-to-use waterproofing agent in semi-liquid consistency. It is composed of high- quality polymers, properly selected and graded fillers.

  1. Product Composition: Nature Blueish Black
    • After drying, convert to dark black.
  2. pH: Value 7-9
  3. Elongation: 300%
  1. Use rubber hand gloves and safety goggles while using MAX 3015 BLACK SEAL. In case of contact with skin, wash with plenty of water. Keep out of reach of children.
Max 3020 Bond P.M.C

MAX 3020 BOND P. M. C- (2 PART). Is a two component, polymer modified, cementitious coating. Which is create non porous film on the substrate. MAX 3020 BOND P. M. C- (2 PART) consisting of cements, finely graded aggregates and a proprietary flexibility.

  1. Concrete, Mortar or Masonry substrates, Terrace, Bathroom Sunk, Balcony, Basement Retaining Wall etc.
  2. Interior or Exterior.
  3. Over Head Water Tank, Under Ground Water Tank, Canal, Dam etc.
  1. Provides a non-porous substrate.
  2. Resist water pressure up to seven meter head.
  3. Enhances abrasion resistance.
  4. Breathable & Low odour.
Max 4001 N.S.A. - 44

MAX 4001 N.S.A. – 44 is Polymer modified pre-mixed, non-shrink, self-curing adhesive and having excellent waterproofing properties. It is specially made for fixing of Ceramic Tiles, Vitrified Tiles, and Stone on any cementitious surface on floor.

  1. Highly cost effective.
  2. Easy to work for various application.
  3. Ideal for any cementitious surface to fix new Ceramic, Vitrified and cementitious tiles.
  4. Improves strength & gives Strong and Durable bonding with surface Self curing properties.
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
  3. Not recommended to use on metal, wood, paint and fully glazed backgrounds.
Max 4002 N.S.A. - 99

MAX 4002 N. S. A. – 99 is highly polymer modified pre packed special tile adhesive for “Tile on Tile” (TOT) application. MAX 4002 N.S.A.– 99 a non-shrink, high bonding, self-curing and high flexible adhesive having excellent.

  1. Ready to use, high bonding and durable.
  2. Suitable for indoor and out door.
  3. No need for hacking or mechanical key on surface.
  4. Ideal for fixing tiles on tiles and tiles on wall.
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
  3. Not recommended to use on metal, wood, paint and fully glazed backgrounds (For any requirement please contact company’s technical person) Multiple list.
Max 4003 N.S.A. - 111

Max 4003 N. S. A. – 111 is Highly polymer modified pre packed special tile adhesive for Internal & External wall cladding Adhesive. Max 4003 N.S.A.-111 is a non-shrink, high bonding, self-curing and high flexible adhesive having excellent waterproofing properties.

  1. Ready to use high bonding and durable.
  2. Suitable for indoor and out door.
  3. No need for hacking or mechanical key on surface.
  4. Ideal for fixing tiles on tiles and tiles on wall
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
  3. Not recommended to use on metal, wood, paint and fully glazed backgrounds (For any requirement please contact company’s technical person).
Max 4004 N.S.A. – 555

Max 4004 N. S. A. – 555 High performance & highly polymer modified pre packed special high quality grey adhesive. It is used for permanent fixing of Granite and Stone application. Max 4004 N. S. A. – 555 is a non-shrink, heat proof, self- curing and highly flexible.

  1. Ready to use high bonding and highly.
  2. Suitable for indoor and out door.
  3. No need for hacking or mechanical key on.
  4. Ideal for fixing tiles on tiles and tiles on wall.
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
  3. Not recommended to use on metal, wood, paint and fully glazed backgrounds (For any requirement please contact company’s technical person).
Max 4005 N.S.A. – 555 +

MAX 4005 N. S. A. – 555+ High performance & highly polymer modified pre packed special high quality grey adhesive. It is used for permanent fixing of Granite and Stone application. MAX 4005 N. S. A. – 555+ is a non-shrink, heat proof, self-curing and highly flexible adhesive.

  1. Ready to use high bonding and highly durable Suitable for indoor and out door.
  2. No need for hacking or mechanical key on surface.
  3. Ideal for fixing tiles on tiles and tiles on wall.
  4. Excellent waterproofing characteristics.
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
Max 4006 N.S.A. – 777

MAX 4006 N.S.A-777 is a high performance, highly polymer modified cement based tile adhesive with excellent bonding properties with various kind of tiles including glossy surface after minimum treatment. It is specially designed.

  1. Ready to use.
  2. Excellent adhesion.
  3. High bonding with all stone and tiles.
  4. Ideal for wall cladding with stone.
  5. Excellent waterproofing.
  1. Wall cladding.
  2. Flooring.
  3. Interior and exterior.
  4. Swimming pool
  5. Dry and wet areas
Max 4008 G.M.A.

MAX 4008 G.M.A. is a high performance & highly polymer modified pre packed special high quality white adhesive. It is used for permanent fixing of Glass Mosaic & Glass Tiles application. MAX 4008 G.M.A. is a non-shrink, heat proof, self-curing and highly flexible adhesive having excellent waterproofing properties.

  1. Ready to use ultra-high bonding and highly durable.
  2. Suitable for indoor and out door.
  3. No need for hacking or mechanical key on surface.
  4. Self-Curing, thus no need to curing.
  1. Surface must be properly clean, away from grease, oil and dust.
  2. Surface must be sufficient flat to permit the specified flatness of finished tiling.
Max 4009 S – 40(LIMIT LESS)

MAX 4009 S – 40 (LIMITLESS) Exclusive geo- binder based, structural and flexible multi-purpose adhesive for bonding all types of material, on all substrates, and for all uses, even in extreme conditions. Eco-friendly. Ideal for use in green building.

  1. Thixo and fluid, high and low thickness, structural adhesion, double open time full wettability, distributes tensile strength, shape memory ,frost risk reduced increases the performance, no-slip, no shrinkage, transfers the forces, water resistant, high deformation, absorbs dynamic loads.
  1. Existing tiles waterproofing products heating systems.
  2. Cement-based screeds asphalt screeds concrete plasterboard.
  3. Fibro-cement slabs gypsum and anhydrite cellular concrete brick.
Max 4010 Semilastic

MAX 4010 SEMILASTIC is a high shear and tensile improved PU based cladding adhesive to use on any construction material to fix any tile on any surface. It is recommended for various kinds of natural stone i.e. marble, granite, slate etc. and total range of tiles.

  1. High flexibility.
  2. Accommodate vibrations and shock.
  3. High bond and Non staining.
  4. High chemical resistance.
  5. Water and UV resistance.
  1. Natural stone i.e. Granite, Marble, Kota, Slate.
  2. Ceramic and vitrified.
  3. Porcelain and design tile.
  4. Glass bricks and glass mosaics.
Max 4011 Flex

MAX 4011 FLEX is a highly modified, single component Polyurethane Adhesive for fixing of Ceramic, Vitrified, Glass Mosaic Tiles and Natural Stones and Engineered Marble on various substrates like Wood, Water Proof Ply Wood, Metal Surface.

  1. Single Component.
  2. High Strength.
  3. Easy to use, Ready to Use.
  4. Bonds strongly on various substrates.
  1. Clean & dry the back surface of the Tile.
  2. Apply MAX 4030 Tile-O-Grip evenly on the back surface of the tile with a roller or brush or spray.
  3. Wait until it mostly dry. The adhesive will feel slightly tacky. (30 – 45 minutes @ room temperature)
Max 4030 Tile-o-grip

MAX 4030 TILE-O-GRIP is a unique single pack Nano polymeric solution that imparts very good tensile strength through molecular level reactive bonding grip between tile & cementitious adhesive.

  1. Easy to apply.
  2. Impact resistant.
  3. Strong adhesion.
  4. Water resistance.
  5. Block the capillary action.
  1. Existing tiles waterproofing products heating systems.
  2. Cement-based screeds asphalt screeds concrete plasterboard.
  3. Fibro-cement slabs gypsum and anhydrite cellular concrete brick.
Max 5001 Wall Life Putty

MAX 5001 WALL LIFE PUTTY is highly modified white cement based putty manufactured from high performing special graded, tested imported ingredients, binders and polymers for obtaining excellent results. MAX 5001 WALL LIFE PUTTY.

  1. Gives smooth, decent finish to uneven surface of cement plaster.
  2. Gives glossy finish and hence reduces paint consumption to the wall.
  3. Highly durable which improves paint life. Smooth finish gives better look.
  1. Remove all loose / sticky material, dust and other contaminates from the wall.
  2. Add 25 to 35 % clean water in to putty to make smooth homogeneous paste.
  3. Make small amount of paste which can be used within 2-3 hours.
Superflex

Superflex develops high elasticity and non-sag effect making it safe to fix water- sensitive ceramic tiles and natural stone even diagonally or from top to bottom on highly deformable and expandable, absorbent and non-absorbent substrates.

  1. High-elasticity adhesive for fixing of ceramic tiles, vitrified tiles, marble and natural stone, on floors and walls, on absorbent and non-absorbent, deformable surfaces.
  1. vitrified tiles, low thickness slabs, ceramic tiles, clinker, cotto, glass and ceramic mosaic, natural stone, marble, granite and recomposed materials also subjected to staining or deformation due to water absorption and thermal expansion.
Max 5003 Eco Prime

Max 5003 Eco Prime Water Thin-able Cement wall seal is acrylic emulsion based primer suitable for application of interior and exterior and plastered surfaces, concrete, asbestos etc.’ It is quick drying, has fast re-coating time and gives smooth finish too.

  1. Stabilizing Wall & Seal Micro porous.
  2. Good binding of chalky or porous substrates and over coating.
  3. Wall seal for masonry top coat like distemper, emulsion, luster and matt wall finishes.
  1. Keep out of reach of children.
  2. In case of contact with skin, wash with plenty of water.
  3. Use rubber hand gloves & safety goggles, while using MAX 5003 ECO PRIME.
Max 5004 Bar seal

MAX 5004 BAR SEAL Primer is a superior rust- proofing coating for iron and steel when used prior to the application of casting the concree. This primer offers good hiding power and recommended for TMT Bar use to seal.

  1. Anti-Corrosive.
  2. Water Base.
  3. Flexible.
  4. Easy to apply.
  1. Surface Preparation: Surfaces contaminated by oil or grease should be cleaned with a solvent. Rust and loosely adhering particles should be removed by a wire brush or any emery cloth or paper.
Max 5005 Max Meta Seal

MAX 5005 MAX META SEAL Primer is a superior rust-proofing coating for iron and steel when used prior to the application of paints. This primer offers good hiding power and is recommended for interior and exterior use to seal metal.

  1. Anti-Corrosive.
  2. Water Base.
  3. Flexible.
  4. Easy to apply.
  1. Surface Preparation: Surfaces contaminated by oil or grease should be cleaned with a solvent. Rust and loosely adhering particles should be removed by a wire brush or any emery cloth or paper.
Max 5006 Crack – X (Powder)

MAX 5006 CRACK-X (POWDER) is cement based polymer modified non-shrink high strength powder material for filling cracks in plastered surface. It is composed of cement, properly selected aggregates, polymer & additives which requires on site addition of water only.

  1. To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
  2. To level the undulation of the un-plastered or plastered ceilings and walls before painting.
  3. To provide smooth finish to brick, stone, and wood works.
  1. Excellent bonding.
  2. Water resistant.
  3. Durable.
  4. Non-shrink.
Max 5007 Crack-X

MAX 5007 CRACK-X (PASTE) is composed of high quality, weather durable acrylic emulsion polymer, graded fillers, light fast pigment & additives. It is a single pack, ready to use flexible component for filling cracks in plastered.

  1. Excellent bonding.
  2. Durable.
  3. Water resistant.
  4. Easy to apply.
  1. To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
  2. To level the undulation of the un-plastered or plastered ceilings and walls before painting.
  3. To provide smooth finish to brick, stone, and wood works.
Max7001 Tile Cleaner

MAX 7001 TILE CLEANER is high quality rapid active cleaner & degreasing solution for use on Tiles, Mosaic Tiles, Bath tubs, Wash basin, and Concrete etc. Whitish spot/layer as normally observed in the bathroom under plastic/metal buckets (normal detergent not helpful) can be removed easily.

  1. Does not damage joints between Tiles, even those grouted with coloured products.
  2. Remove stain easily.
  1. Keep out of reach of children.
  2. Use rubber hand gloves & safety goggles, while using MAX 7001 TILE CLEANER In case of contact with skin, wash with plenty of water.
Max7002 Steel Cleaner

MAX 7002 STEEL CLEANER isready to use cleaner specifically formulated for stainless steel surfaces, including bathroom accessories, home appliances. It quickly & easily removes fingerprints, hard water spot & food stains, leaving a streek – free shine.

  1. Keep out of reach of children.
  2. Use rubber hand gloves & safety goggles, while using MAX 7002 STEEL CLEANER In case of contact with skin, wash with plenty of water.
  1. Ph Neutrazile formula provides smooth application and Cleaning steel/metal surfaces.
  2. Clean & polishes in one step with a pleasant fragrance.
  3. Leaves no greasy build up on surfaces.
Max 7003 Glass Cleaner

MAX 7003 GLASS CLEANER is clean hygiene &Insect Repellent 3 in 1 glass and household cleaner which removes dirt & dust and gives 2 time more shine then regular cleaner across glass & shiny surfaces.

  1. Keep out of reach of children.
  2. Use rubber hand gloves & safety goggles, while using MAX 7003 GLASS CLEANER In case of contact with skin, wash with plenty of water.
  1. Best before two years from the date manufacture when in sealed pack and stored in cool & dry place in unopened condition away from direct sunlight.
Max 7004 Drain Cleaner

MAX 7004 DRAIN CLEANER to be applied on symptoms of chocking in the drain pipe. Use 25 gm. In case of bigger pipes/stubborn debris multiple use is recommended.

  1. Best before one and half years from the date manufacture when in sealed pack and stored in cool & dry place in unopened condition away from direct sunlight.
  1. Keep out of reach of children.
  2. Use rubber hand gloves & safety goggles, while using MAX 7004 DRAIN CLEANER In case of contact with skin, wash with plenty of water.
Max 9001 Joint Filler

MAX 9001 JOINT FILLER is a fine powder consisting of Portland cement, specially selected polymer, properly selected & graded fine fillers. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency.

  1. Keep out of reach of children.
  2. Use rubber hand gloves & safety goggles, while using MAX 7002 STEEL CLEANER In case of contact with skin, wash with plenty of water.
  1. Tile joint must be clean, free from any dust or other contaminates.
  2. Fill the joints after minimum 24 hours from tile fixed with chemical.
  3. Leaves no greasy build up on surfaces.
Max 9004 Epocrete Silk

MAX 9004 EPOCRETE SILK is a unique system of three components – water wipe able, high bonding and high strength, tough, 100% epoxy joint filler. It is 100% Dirt free, stain free, Water proof, Fungal & Bacteria proof, Acid & Chemical resistant ultimate durable epoxy joint filler.

  1. Kitchen.
  2. Swimming Pool.
  3. Floors & Walls.
  4. Food Industries.
  5. Waterbodies Hospitals.
  1. Very easy to apply & clean.
  2. Smoothest surface don’t allow to any dust or fungus.
  3. Ultra high bonding and durability.
Max 9005 Ecolite

MAX 9005 ECOLITE is a unique system of two components – water wipeable, high bonding and high strength, tough, 100% epoxy joint grout. It is Dirt free, Stain free, Water proof, Fungal & Bacteria proof, Acid & Chemical resistant ultimate durable epoxy joint Grout & Adhesive.

  1. Ideal for Laying & Grouting of Glass Mosaic, Swimming Pools, Fountain and other wet area application, Ceramic Tile, Stone, Interior and Exterior, Residential and Commercial, Regrouting application.
  1. MAX 9005 ECOLITE offers a unique Opaque color & Photochromatic that diffuses light and makes any design look more vibrant & enhances the beauty of Glass Mosaic.
Max 2007 Anchor Grout

MAX 2007 ANCHOR GROUT is a three component epoxy resin based anchor grout with high flow properties. The three part formulation gives good chemical resistance to most chemicals.

  1. Base plates.
  2. Rail tracks
  3. Starter bars & dowels.
  4. Reciprocating machinery.
  1. Self-priming.
  2. Strong adhesion.
  3. Rapid strength gain.
  4. Non shrink
Max 2002 RMP

MAX 2002 RMP is a cementitious ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability and curing.

  1. Masonry crack repair.
  2. Plaster and patch work.
  3. Holes filler in brick and RCC wall.
  4. As an adhesive mortar for mini masonry, Block repair.
  1. Pre factory measured high mix design.
  2. Polymer added rich formulation.
  3. Can Repairs cracks, plasters and patchwork.
  4. Easy to use. Uniform sized mix design.
Max 2008 Maxbond EP

MAX 2008 MAXBOND EP (Epoxy Bonding Agent) is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent.

  1. Bonding agent for bonding of old to new concrete / mortar. To extend or repair structural concrete. Bonding agent of glazed brick, tiles, steel & structural members.
  1. Ease of application by brush.
  2. Excellent adhesion.
  3. Bond strength exceeds the tensile strength of concrete hence no failure of concrete due to degree of movements.
Max 2009 Maxbond EP

MAX 2009 MAXBOND EP (Epoxy Mortar) is a three component repair mortar based on solvent-free epoxy resin and graded quartz aggregate.

  1. Structural repair to spalled roads and concrete runways, stair nosing’s and pre-cast concrete. General repairs to damaged concrete. Heavy duty support to crane rails and bridge bearing pads. Impact and abrasion resistant patch repairs to concrete floors.
  1. High compressive, flexural and tensile strength.
  2. Stable, non-shrink material with high mechanical strength.
  3. Good chemical, abrasion and impact resistance.
Epolit RS 7052 Epoxy System for Natural Stone

This EPOXY resin system offers a viscosity and surface tension specially designed for the treatment of natural stone on industrial lines, indicated for reparation of fissures, pin-holes and micro-cracks found in natural stone.

  1. This epoxy system is preferably applied manually, directly on the stone surface. The ideal application requires keeping the stone at a constant temperature through the whole process, pre-heating the stone to 40 – 45 oC to reduce humidity and boost reaction.
  1. Keep away from the light between 15 oC and 25 oC. Avoid the contact between hardener and metal packages or other metallic items, under these conditions, the maximum storage time is 12 months.
Epolit RS 7109 Epoxy System for Natural Stone

EPOLIT RS 7109 epoxy resin system designed for the treatment of reparation of fissures, pin-holes and Owed to its progressive and constant ratio, it is optimal for usage achieving reduced curing cycles.

  1. his epoxy system is applied by stone surface. The ideal application temperature through the whole and boost reaction.
  1. Keep away from the light between 15 oC and 25 oC. Avoid the contact metal packages or other metallic items, under maximum storage time is 12 month.
Technical Data Sheet Product

Apply only when the temperature is above 5 °C (41 °F), even after application. Clean the surface to remove any dirt, grease, or anything else that could prevent PRIME SHIELD from penetrating below the surface. Avoid using acidic detergents.

  1. Ensure that work area is well-ventilated during application and until surface is dry. It is recommended the use of personal protective equipment during application. Read the safety sheet before application.
  1. PRIME SHIELD 200 and 800 are products for marble, natural stone and concrete water-based. These products are easy to apply, do not require rinsing and have a very low content of volatile compounds. After application it penetrates the stone and marble, reacting with the free calcium.
Brillo-Silicone Wax

BRILLO is a straight-chain polydimethylsiloxane modified with fluorinated groups. It has a hydro. Repelling action by penetrating into materials up to 4 mm and has polishing. Silicone components. BRILLO is permeable to vapor; processed surfaces keep totally breathable.

  1. Keep the tins well sealed in a cool and ventilated place for a maximum of 12 months as from the
    • date of production printed on the tin.
  1. Keep the place ventilated while applying the product and when it dries.
    • It is recommended to use of personal protective equipment during application. Read the safety data sheet carefully before
Granilux
  1. GRANILUX is a product used to unify the colors of granites, formulated with a mix of chain.
  2. Modified silicone resins and waxes. It has excellent polishing and oil-repellent effects.
  3. The breathability of the various surfaces subjected to treatment. GRANILUX is available in both.
  4. Granite and similar materials.
  1. Keep containers tightly closed and in a cool, dry, and ventilated place for a maximum of 12 months.
  2. From the date of manufacture shown on the tin.
  1. During the application and drying time, ventilate the room. We recommend the use of appropriate
  2. PPE during application. Before starting work, read the safety data sheet.
Mastic For Marble Jolly Glass

JOLLY GLASS (available in liquid and tixo densities) is made of combined synthetic resins and is mainly used to glue and fill up any type of marble or natural stone. It satisfies any request from the end- user thanks to the available densities. With a strong grip, it becomes very tenacious and perfectly polished after hardening.

  1. Keep the tins well sealed in a cool, ventilated place for a maximum of 12 months from the date of production printed on the tin.
  1. Ensure the work area is well ventilated during application and until the surface is dry. It is recommended to use personal protective equipment during application. Read the safety sheet before applying.
Jolly Glass And Tixo Glass
  1. JOLLY GLASS (available in liquid and tixo densities) is made of combined synthetic resins.
  2. Is mainly used to glue and fill up any type of marble or natural stone. It satisfies any request from.
  3. travertine, especially when you want to leave them visible. Furthermore, JOLLY GLASS
  1. Keep the container well closed and store it in a cool (temperature below 25°C) and ventilated.
  2. Environment for a maximum period of 12 months (normal versions) and 6 months (accelerated version) from the date of production marked on the tin.
  1. Ensure the work area is well ventilated during application and until the surface is dry.
  2. Use of personal protective equipment during application. Read the safety sheet before applying.
Jolly Transparent Gold High Adhesion
  1. Mastic is based on synthetic combined resins, and it is used mainly to weld and plaster all types of
  2. Marble and natural stones, including granite. With all the available versions, it is an easy application.
  1. Keep the packages well closed and in a cool, ventilated place for a maximum of 12 months.
  1. During the application and the drying time, ventilate the place. It is recommended to use the
  2. appropriate DPI during the application. Read the safety data sheet carefully before applying. the date of production printed on the tin.
Max Pave Hard-R

MAX 1010 PAVE HARD-R, MAX 1011 PAVE HARD-M, and MAX 1012 PAVE HARD-PC are polymer-based accelerators for accelerating the setting time of paver blocks for early strength development.

  1. Reduce the water/cement ratio.
  2. Increase the rate of strength development.
  3. Increase the density of the mix.
  1. A severe over dosage will result in an increase in the workability of concrete.
  2. Retardation of initial setting time
  3. Does not affect the ultimate concrete strength.
TWINS.TW-removebg-preview
TWINS TW
  1. CHARACTERISTICS: Anti-stain treatment for surfaces of polished marble, granite and stoneware. TWINS. TW is an excellent water and oil repellent. Solvent-based product.
  1. On a well clean and dry surface evenly apply one coat of TWINS.TW performing circular movements, using a cloth. Once completely dry remove the eventual excess using a pad or a cloth. On very absorbent surfaces we recommend applying a second coat.
  1. We remind that TWINS.TW is an excellent water & oil repellent but doesn’t protect from acid attacks (lemon, coke, wine, etc..). Surfaces treated with TWINS.TW are laboratory certified as suitable for food contact.